Sapphire Water Filtration – BC10P1 Jumbo Large Diameter Pleated Sediment Filter Cartridge, 10 inch, 1um

1 Micron Jumbo Pleated Sediment Filter – BC10P1

4.5″ x 10″ Jumbo Carbon Block Filter to fit inside BH10W Whole House Filtration Housing

Technical Details:

Better Water, Pure and Simple: Upgrade your home’s water quality with the Sapphire BC10P1 jumbo sediment filter. This easy-to-use filter ensures cleaner, clearer water for your whole house and protects your pipes from sediment buildup.

Versatile Compatibility: Engineered to fit seamlessly into our BH10W housing unit, our filter can be used alone or combined with others to customize your filtration needs and remove different contaminants from the water.

Pleated Filtration: Our BC10P1 filter features pleated filtration technology, capturing dirt, sand, sediment, and rust particles down to 1 micron, ensuring your water is free from visible impurities.

Installation

Basic Install Instructions for BH10W which is the housing for the BC10 range.
– see instruction manual for more details

1. Prepare: Turn off the main water supply & open a tap to release pressure.
2. Plan and Position: Find a good spot near the main water line leading into your house & make sure there’s room for the unit and future maintenance.
3. Cut and Connect: Measure and cut the water pipe, use plumbers tape on all threads, then connect fittings carefully.
4. Mount: Securely attach the unit to the wall. Keep it level and aligned with the pipe.
5. Install Filter: Follow the instructions on the previous page to correctly install the filter.
6. Connect Pipes: Attach the cut pipe to the unit’s inlet and outlet. Check for leaks and tighten if needed.
7. Test and Flush: Turn on the main water supply. Check for leaks and flush out any air and debris.
8. Final Check: Look for leaks and fix if any. Make sure the unit works properly.

The Sapphire Jumbo Housing Kit is designed for cold water use only and can body a range of compatible cartridges : BC10P/BC10P1/BC10P10/BC10P20/BC10R/BC10C/BC10C1.